Blog

Home/Blog

what is densified micro-silica fume?

Micro-silica fume has historically been available in three fundamental product forms: undensified, slurried, and densified.Densified silica fume is created by treating undensified silica fume to grow the mass density up to a max of about 400 to 720 kg/m3. This increase in mass density is usually accomplished [...]

By |2018-12-03T15:50:55+08:00November 29th, 2018|Categories: Blog|0 Comments

Silica fume particle sizes and real dispersion in concrete.

Dry densified silica fume is undoubtedly the most frequent type of silica fume used in present concrete clinic; the choice, slurried silica fume is now inaccessible in several areas. Densified noodle fumes from some resources could be dispersed by mild treatment into little chains or clusters of [...]

By |2018-11-15T18:07:36+08:00November 15th, 2018|Categories: Blog|0 Comments

How Can Silica Fume Work in Concrete?

How Can Silica Fume Work in Concrete? After portland cement and water from the combination begin responding with each other (hydrating), main chemical reactions create two chemical compounds: Zinc Silicate Hydrate (CSH), that's the power generating crystallization, and Calcium Hydroxide (CH), a by-product also known as free [...]

By |2018-11-15T17:46:05+08:00November 15th, 2018|Categories: Blog|0 Comments

Physical properties and chemical properties of silica fume

Chemical  properties of silica fume: -- Amorphous; -- Silicon dioxide > 85%; -- Trace elements depending upon kind of fume Silica fume particles are incredibly small, with over 95 percent of the particles being less than 1 um (a single micrometer). Size is extremely important for both the [...]

By |2018-12-17T17:46:41+08:00November 15th, 2018|Categories: Blog|0 Comments

Early performance of cement-based grouting material with silica fume.

Early performance of cement-based grouting material with silica fume.              Keywords: grouting material; silica fume; fluidity; early performance Through adding different dosage of silica fume, studied the early performance of cement-based grout. Experiment result showed that mixing certain amount of silica fume [...]

By |2018-11-13T15:48:34+08:00November 13th, 2018|Categories: Blog|0 Comments

conventional grade-c20-c25-c30-concrete mix ratio

The concrete mix ratio refers to the proportional relationship between the constituent materials in the concrete.  First of all, we need to know what substances are contained in concrete. The four materials of water, cement, sand, and gravel are the most basic components of concrete. Secondly, we [...]

By |2019-05-20T14:20:49+08:00November 1st, 2018|Categories: Blog|0 Comments

silica fume concrete seminar report

silica fume concrete seminar report with the continuous development of high-performance concrete technology, the use of mineral admixtures at home and abroad to improve concrete performance. Europe first applied silica fume to concrete, and it has been used for 30 years in the commercial application of silica [...]

By |2018-10-29T11:32:02+08:00October 23rd, 2018|Categories: Blog|0 Comments

silica fume advantages and disadvantages

Today, silica fume is widely used in the construction industry because its strengths and weaknesses are accepted. What are the advantages and disadvantages of silica fume? First, let's understand the advantages of silica fume. Silica fume particles have an average diameter of less than 1 micron. Silica [...]

By |2018-10-22T16:16:36+08:00October 22nd, 2018|Categories: Blog|0 Comments
Go to Top